Re: [IUG] Receipt printer Epson TM-88IV auto-cut

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Ken,

That is good to know. I have started the process with III with the information that you provide. I will have this information added, too. Thanks, again. Gene

________________________________________
From: innopac-bounces at innopacusers dot org [innopac-bounces at innopacusers dot org] On Behalf Of Ken Brady [kbrady at cambridgelibraries dot ca]
Sent: Thursday, January 29, 2009 5:19 PM
To: IUG INNOPAC List
Subject: Re: [IUG] Receipt printer Epson TM-88IV auto-cut

That sounds good except there needs to be a specific box for auto cut
that III had to enable it to show up. Also they needed the command codes
before it would work with the epson IV. I am sorry but I have little to
do with Millennium directly so i am not familiar with the actual set up
of the printer in Millennium. But I can find out next week.

ken

Gene Kenney wrote:

>Ken,
>
>I check the Print form feed box found under: File, Select Printer, Receipt Printer, Local Printer, and Format. Do you get the Lines to Eject. I have that set at 2, which gives me two blank lines after the last line of print. This cuts the paper in the blank space when it is working. I have a Epson TSP2000 printer that is working fine with the auto-cut. Thanks, Gene
>
>Shalom (שָׁלוֹם),
>--
>Gene Kenney
>Library Technology Specialist &
>Assistant System Administrator
>Bethel University Library
>Bethel University & Seminary
>3900 Bethel Drive
>St. Paul, Minnesota 55112
>voice:651-635-8733
>fax: 651-635-2393
>email: gkenney at bethel dot edu
>Daniel 5:21 (NKJV) "the Most High God rules in the kingdom of men, and appoints over it whomever He chooses"
>
>
>-----Original Message-----
>From: innopac-bounces at innopacusers dot org [mailto:innopac-bounces at innopacusers dot org] On Behalf Of Ken Brady
>Sent: Thursday, January 29, 2009 4:15 PM
>To: IUG INNOPAC List
>Subject: Re: [IUG] Receipt printer Epson TM-88IV auto-cut
>
>Note that you need to go into your III profiles to check the autocut
>box. I actually don't know exactly where that box is as someone else
>does that. But, i can find out if you need it.
>
>Ken
>
>Gene Kenney wrote:
>
>
>
>>Ken,
>>
>>Thanks, Gene
>>
>>Shalom (שָׁלוֹם),
>>--
>>Gene Kenney
>>Library Technology Specialist &
>>Assistant System Administrator
>>Bethel University Library
>>Bethel University & Seminary
>>3900 Bethel Drive
>>St. Paul, Minnesota 55112
>>voice:651-635-8733
>>fax: 651-635-2393
>>email: gkenney at bethel dot edu
>>Daniel 5:21 (NKJV) "the Most High God rules in the kingdom of men, and appoints over it whomever He chooses"
>>
>>
>>-----Original Message-----
>>From: innopac-bounces at innopacusers dot org [mailto:innopac-bounces at innopacusers dot org] On Behalf Of Ken Brady
>>Sent: Thursday, January 29, 2009 3:43 PM
>>To: IUG INNOPAC List
>>Subject: Re: [IUG] Receipt printer Epson TM-88IV auto-cut
>>
>>Yes you will need the codes from epson and also have III turn on this
>>feature. I will send what info I have later tonight but after a year of
>>poking people we have it working now.
>>
>>There are some archives on this but I don't think all the info is there.
>>
>>ken
>>
>>Gene Kenney wrote:
>>
>>
>>
>>
>>
>>>Has anyone been able to get the Epson Thermal printer TM-88IV to auto-cut in Millennium (circulation module). It auto-cut when you print in anything else, i.e. Microsoft Word. I have it connected directly to the computer's usb port. Thanks, Gene
>>>
>>>Shalom (שָׁלוֹם),
>>>--
>>>Gene Kenney
>>>Library Technology Specialist &
>>>Assistant System Administrator
>>>Bethel University Library
>>>Bethel University & Seminary
>>>3900 Bethel Drive
>>>St. Paul, Minnesota 55112
>>>voice:651-635-8733
>>>fax: 651-635-2393
>>>email: gkenney at bethel dot edu
>>>Daniel 5:21 (NKJV) "the Most High God rules in the kingdom of men, and appoints over it whomever He chooses"
>>>
>>>
>>>
>>>
>>>
>>>
>>--
>>This message was distributed through the Innovative Users Group INNOPAC list
>>Public replies: INNOPAC at innopacusers dot org
>>Update your subscription options: http://innopacusers.org/mailman/listinfo/innopac
>>
>>
>>
>
>
>

--
Ken Brady
Technical Support Services Technician
Cambridge Libraries & Galleries
1 North Sq.,
Cambridge, Ontario, Canada, N1S2K6

phone 519-621-0460 ext. 138



--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
--
This message was distributed through the Innovative Users Group INNOPAC list
Public replies: INNOPAC at innopacusers dot org
Update your subscription options: http://innopacusers.org/mailman/listinfo/innopac