[ List Archives Home ] [ Thread index for 2008 ]
[ Date index for 2008 ]
[ Author index for 2008 ]
[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
- Date: Wed, 22 Feb 2006 14:26:46 -0500
- From: "Zhang, Jingping" <zhangj at marshall dot edu>
- Subject: RE: [IUG] Dell Printer with Millennium
Thanks, Bob!!!
Jingping Zhang
Assistant Dean of Library Technology / Associate Professor
Marshall University Libraries DL 339
Voice: 304-696-2326 / Cell: 304-634-0110 / Fax: 304-696-5858
zhangj at marshall dot edu
-----Original Message-----
From: innopac-bounces at innopacusers dot org
[
mailto:innopac-bounces at innopacusers dot org] On Behalf Of Bob Rasmussen
Sent: Tuesday, February 21, 2006 6:25 PM
To: IUG INNOPAC List
Subject: RE: [IUG] Dell Printer with Millennium
On Tue, 21 Feb 2006, Zhang, Jingping wrote:
> Hello Bob,
>
> Thanks so much for your respond!!!!
>
> The Printer is Dell 4156-0d1; Model: J740
I found the User's Guide for the Inkjet Printer J740 at Dell's site.
Although it doesn't state it outright, I suspect this printer is a
Windows-only printer.
>
> The catalog librarian wants to print as text such as try to print
> statistics after you close the Millennium.
You can't. You will have to print in Graphics mode on this printer.
> The printer drivers were downloaded directly from Dell and should be
up
> to date. If for some reason they aren't, then Dell has not updated
this
> particular printer, which I doubt.
If you print in Text mode, the driver is not used, so it doesn't matter
what driver you have.
Once you switch to graphics mode, assuming you have a decent driver, you
should get printout. If it is not correct in layout, then, you might
consider using Print Wizard.
Regards,
....Bob Rasmussen, President, Rasmussen Software, Inc.
personal e-mail: ras at anzio dot com
company e-mail: rsi at anzio dot com
voice: (US) 503-624-0360 (9:00-6:00 Pacific Time)
fax: (US) 503-624-0760
web:
http://www.anzio.com
--
This message was distributed through the Innovative Users Group INNOPAC
list
Public replies: INNOPAC at innopacusers dot org
Update your subscription options:
http://innopacusers.org/mailman/listinfo/innopac